Ajman Free zone area

building a1 floor 6, office 617

+ 971 50 889 54 09, + 971 50 870 80 67

e-mail: info@rusinterwood.com

Integration Middle East - F.Z.C.

Ajman Free zone area

building a1 floor 6, office 617

+ 971 50 889 54 09, + 971 50 870 80 67

e-mail: info@rusinterwood.com

Integration Middle East - F.Z.C.

انتجریشن میدیل أیست ش. م. ح

Bakelite plywood - a unique building material. In performance this material is not inferior to some sorts of low-alloy steel. This is achieved using a special technology of its production, which is based on the impregnation of birch veneer water- or alcohol-soluble resins (phenol-formaldehyde). After impregnation at 270 ° C, material pressed and glued together under a pressure of 6 atm. This building material that withstands high humidity and temperature. It is not covered with mold and fungus, rot, so it can be used even in countries with a humid climate, and on the banks of the sea. Bakelite plywood waterproof, fireproof, keep its properties of up to 10 years. The material has well resistant to temperature changes in the range of 100 ° C (- 50 C + 50 C), to aggressive environments (plywood is resistant to weak acids, gasoline, kerosene, alkalis). When the temperature is about +350C degrees this type of plywood starts to char but not fire.

 

PBS has the following properties:

 

increased strength;

moisture resistance;

durability;

good resistance to aggressive components; ire resistance;

 

resistant to mold and mildew.

 

Specifications

 

Plywood FBS. Its outer layers are made from a single sheet of veneer, quality of which fully corresponds to grade BB. The upper layers must fully coated with a resin and have no dents, overlap and other visible defects.

 

Stove FBD has the following operational characteristics:

 

Sheet size mm: 1250*5700, 1250*2850, 1250*2500 ;

thickness from 5 to 40 mm;

maximum tensile strength along the veneer: not less than 73.5 mPa; maximum strength in static bending: 78,5 mPa;

 

Density: not more than 1200 kg / m3.

 

Wood stove layered FB.

 

This material is able to retain its useful properties over long periods of time at temperatures of -50 to + 50 ° C. The quality of raw material used in the manufacture of plywood, must comply with class B for the outer layers and a variety of explosives - internally. The warranty period - not less than 5 years.

 

Main specifications:

 

sheet size: 1220*2440 mm;

 

thickness: 7 to 21 mm;

 

maximum tensile strength along the veneer: not less than 78.0 mPa;

 

Density: not more than 1200 kg / m3.

 

Bakelite sheets are used in:

 

automotive industry: the production of boards, loors, trailers, containers; Shipbuilding: Cabin small vessels and marine yachts;

Water Technology: construction equipment (locks, hydraulic locks, etc.);

 

maximum strength in static bending: not less than 68.5 mPa;

Construction: construction formwork for building reinforced slabs, columns and other building elements, construction of sheds, walls and other architectural forms.

انتجریشن میدیل أیست ش. م. ح

RUS/ENG

bakelite

plywood